designed & dimensioned in millimeters[inches] this product manufactured with lead-free processing pb do not scale from this print 3.2 .12 6.4 .25 recommended cable stripping sma-ins-011 sub-sma-p-c-x-st-ca5 fig.1 sma-p-c-x-st-ca5 shown sma-pin-007-x sma-p-c-x-st-ca5 gender -p: plug type -c: cable plating specification -h: heavy gold (see notes 7 & 8) (sma-pin-007-h) (sub-sma-p-c-f-st-ca5) (sma-ins-011) termination -ca5: cable (.063" semi-flexible cable) orientation -st: straight c sheet of unless otherwise specified, dimensions are in millimeters [inches]. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: sma straight cable plug, 25 awg cable - 50 ohm by: sma-p-c-x-st-ca5 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 01/22/2008 3 1 sheet scale: 4:1 f:\dwg\misc\mktg\sma-p-c-x-st-ca5-mkt.slddrw notes: 1. represents a critical dimension. 2. center contact pushout force: 26.69 n [6 lb] min. 3. see sheet 3 for termination information. 4. note deleted. 5. product to be packaged per packaging standard co-hd-wi-3040-m. 6. rohs compliant. 7. plating: -f: .000003" min. gold over .000050" min. nickel. -h: .000030" min. gold over .000050" min. nickel. 8. assembly plating designations: -h: (center contact)-h (outer contact) -f cable body,coupling nut,c-ring: brass contact: brass dielectric: ptfe gasket: silicone 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision g
0.92 ref .036 1.27 ref .050 0.52 ref .020 7.25 ref .285 10.55 ref .415 2.60 ref .102 9.45 ref .372 8.00 (hex) ref .315 9.00 ref .354 1.60 ref .063 0.60 ref .024 0.49 ref .019 sheet of sma straight cable plug, 25 awg cable - 50 ohm by: sma-p-c-x-st-ca5 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 01/22/2008 3 2 sheet scale: 4:1 f:\dwg\misc\mktg\sma-p-c-x-st-ca5-mkt.slddrw revision g 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
20.0 2.5 .79 .10 sma-ins-011 hst-0.125-02-blk 2.30 - 0.10 0.00 (to center contact) .091 - .004 + .000 sub-sma-p-c-x-st-ca5 reference plane c 0.92 ref .036 0.05 ref .002 (to insulator) detail 'a' scale 8 : 1 reference plane 3.2 ref .12 6.4 ref .25 0.6[.03] max. gap allowable 3.2 .13 2.6 0.5 .10 .02 .063" semi-flexible cable 0.10 max. gap allowable .004 sma-pin-007-x c apply heat shrink tubing solder sub assembly add sub-sma-p-c-x-st-ca5 solder signal pin add insulator and heat shrink tube tin inner and outer conductor remove cut jacket strip and locate jacket sheet of sma straight cable plug, 25 awg cable - 50 ohm by: sma-p-c-x-st-ca5 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 01/22/2008 3 3 sheet scale: 1.5:1 f:\dwg\misc\mktg\sma-p-c-x-st-ca5-mkt.slddrw revision g 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
